Конвертор Двоен офсетов Inverto Pro IDLO-TWS411-OOPRO-OPN - PLL
Арт.№: КОНВЕРТОР LNB INVERTO IDLO-TWS411-OOPRO-OPN
1 от 1
Поставените снимки са с илюстративен характер. В действителност продуктът може да се отличава външно, като това не променя функционалността и характеристиките на изделието.
Информация
Конвертор Двоен офсетов Inverto Pro IDLO-TWS411-OOPRO-OPN - PLL
Инфо:
Technical specifications
Input frequency range 10.7 GHz ~ 12.75 GHz
Output frequency range 950 MHz ~ 2150 MHz
Low band LO frequency 9.75 GHz
High band LO frequency 10.6 GHz
Noise figure 0.3 dB typ. (0.7 dB max.)
LO frequency accuracy @ 25° C ±500 kHz max.
LO temperature drift ±1.0 MHz max.
LO phase noise @ 10 kHz -80 dBc/Hz max.
Conversion gain 55 dB min.
Gain ripple (over 26 MHz bandwidth) ±0.75 dB
Gain variation (over full band) ±4 dB
Image rejection 40 dB min.
3th order intermodulation - ICP3 10 dBm min.
1 dB compression point (@ output) 0 dBm min.
Cross polarization isolation 22 dB typ.
Control signal Ca (V) 11.0 V ~ 14.0 V
Control signal Cb (H) 16.0 V ~ 20.0 V
Control signal Cc (band switching) 22 kHz ±4 kHz, 0.4V ~ 0.8V pp
Output VSWR 2.5 : 1
In band spurious level -60 dBm max.
Current consumption 120 mA max. @ 11 VDC ~ 20 VDC
Operating temperature -30 °C ~ +60 °C
Output impedance 75 Ω
Output connector type F-type (female)
Dish F/D ratio 0.6
Weight 218 g
Logistical info
Packaging dimensions (W x D x H) 15.5 cm x 9.1 cm x 7.6 cm
Packaging weight 0.278 kg
Инфо:
Technical specifications
Input frequency range 10.7 GHz ~ 12.75 GHz
Output frequency range 950 MHz ~ 2150 MHz
Low band LO frequency 9.75 GHz
High band LO frequency 10.6 GHz
Noise figure 0.3 dB typ. (0.7 dB max.)
LO frequency accuracy @ 25° C ±500 kHz max.
LO temperature drift ±1.0 MHz max.
LO phase noise @ 10 kHz -80 dBc/Hz max.
Conversion gain 55 dB min.
Gain ripple (over 26 MHz bandwidth) ±0.75 dB
Gain variation (over full band) ±4 dB
Image rejection 40 dB min.
3th order intermodulation - ICP3 10 dBm min.
1 dB compression point (@ output) 0 dBm min.
Cross polarization isolation 22 dB typ.
Control signal Ca (V) 11.0 V ~ 14.0 V
Control signal Cb (H) 16.0 V ~ 20.0 V
Control signal Cc (band switching) 22 kHz ±4 kHz, 0.4V ~ 0.8V pp
Output VSWR 2.5 : 1
In band spurious level -60 dBm max.
Current consumption 120 mA max. @ 11 VDC ~ 20 VDC
Operating temperature -30 °C ~ +60 °C
Output impedance 75 Ω
Output connector type F-type (female)
Dish F/D ratio 0.6
Weight 218 g
Logistical info
Packaging dimensions (W x D x H) 15.5 cm x 9.1 cm x 7.6 cm
Packaging weight 0.278 kg
